Where GNSS-only workflows reach their limits
Traditional GNSS workflows face limitations when satellite signals are blocked, points are difficult or unsafe to reach, or projects move between open-sky and obstructed environments. V100F keeps surveying continuous with multi-sensor fusion, enabling reliable data capture beyond the limits of conventional GNSS.
Tunnel
GNSS Signal Blocked
Deep Excavation
Difficult Point Access
Under Bridge
GNSS Signal Loss
Steep Slope
Unsafe to Approach
FJD V100F
Key Highlights
GNSS, LiDAR, camera and IMU data work together for reliable positioning
Supports UHF radio, 4G, Wi‑Fi, Bluetooth and NFC
Measure multiple targets from up to 20 m away
Keep working in obstructed and GNSS-denied areas
Capture points, lines, surfaces and volumes
Use one device as both an RTK rover and a scanner
Capture data in FJD Trion Survey and process it in FJD Trion Model
Combine outdoor RTK and indoor scan data in one coordinate system
Why V100F changes field capture
Designed for complex surveying tasks, the V100F combines GNSS surveying, 3D scanning and on-site image capture in one device. It supports data capture where satellite positioning signals are weak, obstructed or unavailable. It enables continuous data capture during indoor–outdoor transitions, beneath bridges, and in culverts and tunnels, as well as stockpile volume calculation and site verification, helping improve field efficiency and deliver more complete survey results.
From Capture to Deliverables
From field data capture to engineering deliverables, FJD Trion V100F integrates positioning, spatial data collection, and modeling into one seamless workflow.
From Capture to Deliverables
From field data capture to engineering deliverables, FJD Trion V100F integrates positioning, spatial data collection, and modeling into one seamless workflow.
Built for Demanding Engineering Environments
Urban Canyons
Mining and Earthwork
Tunnels and Underground Mining
Bridges and Viaducts
Road Engineering
Utility Trenches
Designed to Work Together
Capture, process, and deliver your 3D data within one connected FJD Trion workflow.
Field Capture
Capture GNSS receiver coordinates, point clouds, and field data directly with V100F.
Cloud Sharing and Collaboration
Process, visualize, and transform captured data into accurate 3D models and deliverables.
Create your FJD Trion plan
Our solutions support different field based workflows across construction, forestry, mining, inspection, mapping, public safety, and more. The product combination depends on how your team works today and where time or money is being lost.
プロジェクトの種類、現在のワークフロー、主な課題を共有いただければ、当社の専門家がチーム向けに最適化されたFJD Trionソリューション をご提案します。 無料相談またはデモをご希望ですか？ お問い合わせ
From Point Survey to Spatial Capture
Traditional Point Survey
|
V100F Spatial Capture |
|
|---|---|---|
|
Measurement
|
Point-by-point measurement
|
Continuous spatial capture
|
|
Environment
|
Best suited for accessible environments
|
Extended capability for complex environments
|
|
Data Type
|
Individual coordinates
|
Coordinates + Point Cloud + Images + Models
|
|
Coverage
|
Selected point measurement
|
Complete site capture
|
|
Operation
|
Direct target measurement
|
Non-contact measurement
|
Output | Survey points | Spatial models for verification and analysis |
FJD Trion V10L 仕様
GNSS
L1, L2, L3
*Supported through a firmware upgrade
System Accuracy
V: 3.5 mm + 0.4 ppm RMS
V: 5 mm + 0.5 ppm RMS
垂直: 5 mm + 1 ppm RMS
V: 15 mm + 1 ppm RMS
Tilt angle: 0 to 60°
カメラ
通信およびデータストレージ
Transmit power: 2 W
Protocol: TRIMTALK, TRIMTALK 450S, TRANSEOT, TRIMMARK 3, SATEL, LoRa
Range: typically 6–12 km; up to 16 km under optimal conditions
UHFアンテナポート
USB Type-Cポート
Input: RTCM 2.x, RTCM 3.x, CMR
ハードウェア
FOV: H 360°, V 62°
Number of lines: 32
Eye safety class: Class 1
Storage: -40 °C to +75 °C (-40 °F to +167 °F)
45 W PD fast charging
UHF/4G RTK rover: typical 3 W, up to 22 h
(8.46 in × 5.12 in × 4.72 in)
注：バッテリー寿命は、動作環境、動作温度、および動作モードによって異なります。通常の動作条件下では標準的な寿命があります。
