I. Nuevas funciones

1. Thermal Imaging Inspection Module

• Adds a Thermal Imaging Inspection module that supports processing thermal imaging scan data on the cloud platform, including point cloud mapping, thermal and visible-light data association, AI analysis, and inspection report generation.
• Notes:
  • The module currently supports thermal imaging data collected with  P2 Vision+.
• • Requirement: Data must be collected using Thermal Imaging Mode on P2 V1.3.0. Currently, the module supports only Indoor Water Leakage Detection and Data Center Hotspot Analysis. Data from other scanning modes or scenarios is not supported.
• Disclaimer: AI thermal imaging analysis results are for screening reference only and cannot replace engineering diagnosis or certification conclusions. Please make final judgments in conjunction with equipment operating status, on-site environment, and operational specifications.

• Inspection rules can be configured by scenario before data resolving:
  • Data centers: Supports criteria such as absolute temperature and temperature difference. 
  • Indoor water leakage: Supports criteria such as surface temperature difference and anomalous area. 
  • Rules can be configured with Low, Medium, or High risk levels.
• After data processing is completed, the thermal imaging AI analysis report can be viewed in the 3D workspace. Anomaly cards in the report are bidirectionally linked with 3D spatial markers: clicking a card locates the corresponding scan trajectory point, allowing viewing of thermal imaging, visible light evidence, and AI analysis suggestions.

• Supports exporting inspection reports in PDF or Word format from the workspace.

2. Real-Scene Roaming Optimization

• Supports generating Real-Scene Roaming from eligible raw data. When an external camera is used for colorization and the data includes video files (.insv), the platform automatically processes the corresponding video data to support Real-Scene Roaming.
• Improves switching between point clouds and Real-Scene Roaming. Returning to the point cloud retains the current view, while entering Real-Scene Roaming automatically jumps to the nearest trajectory point.

3. Digital Human Display

• Supports loading and moving a digital human in 3DGS spaces, with collision detection.

4. Measurement Experience Optimization

Adds a magnifier during measurement and improves measurement point selection.

5. LAZ Point Cloud Format Support

• New LAZ point cloud format support. LAZ files can be selected when uploading model data.
• Point cloud files generated from raw data processing and coloring will use LAZ format.

6. Interior Design Module Optimization

• Adds a Generate Floor Plan option to model data upload, raw data upload, and in-project raw data resolving workflows. The option is enabled by default to make it faster to generate floor plans for interior design.